Arlows Ceramic heat protection tape white
High insulation performance with maximum heat resistance. Ceramic particles withstand around 1200 °C.
High-quality Ceramic heat protection tape in white for wrapping manifolds, bifurcated pipes, downpipes and exhaust systems. Length and width are selected in the variant. Approx. 2 mm thick – more mass between the pipe and neighbouring parts than thin decorative tape.
Why Ceramic White?
~1200 °C
Ceramic particles in the fabric insulate the exhaust pipe. Cheap glass fibre tape often handles significantly less and chars where it matters.
APPROX. 2 MM THICK
More mass between the pipe and neighbouring parts. Less radiation onto cables, hoses and the engine bay.
TURBO + PROTECTION
Heat stays in the exhaust stream – the turbo responds better. At the same time the load on neighbouring components decreases and the manifold cools more slowly (less risk of cracking).
WHITE
Classic look. High-quality ceramic for sections, repairs or complete manifolds.
Use cases
- Manifolds and header manifolds
- Bifurcated pipes and downpipes
- Sections, repair spots and short exhaust sections
- Wherever heat should stay in the exhaust stream and radiation should be reduced
Guideline: A complete 4-cylinder header manifold typically needs approx. 15 metres. Choose the appropriate roll length accordingly.
Technical data
| Material | Ceramic heat protection tape |
| Temperature resistance | approx. 1200 °C |
| Thickness | approx. 2 mm |
| Colour | White |
| Length / width | see variant |
| Manufacturer | Arlows, Langenhagen (DE) |
Fitment
Clean and degrease the pipes beforehand. Wrap the tape tightly and with overlap. Secure with V2A stainless steel cable ties – plastic ties melt on the manifold. Maintain the overlap, secure the ends.
Note: Every heat protection tape smokes briefly on first heat-up. This settles after a few minutes. Only run in a well-ventilated area / outdoors. Not intended for the StVZO area if the vehicle is modified thereby.
