Arlows Weld-on hose barb Aluminium Dash 8/13 mm
Weld in a hose connection.
This weld-on hose barb adds a connection for a suitable hose to a compatible component. Material and connection size depend on the selected version. This version: Hose size: Dash 8. Nominal size: 13 mm.
Benefits at a glance
LOCATE THE HOSE CONNECTION
Position the connection during fabrication to suit the planned line route.
CHECK THE VERSION
Match the material and nominal size to the intended hose.
Technical specifications
| Hose size | Dash 8 |
|---|---|
| Nominal size | 13 mm |
| Material | Aluminium |
| SKU | AR4100-1 |
Applications
For custom fabrication of suitable tubes, tanks or housings. The hose, barb and retention method must match the fluid and operating conditions.
Included
1 piece in the described or selected version.
Installation & notes
Have welding carried out by a suitably qualified specialist. Check material compatibility, wall thickness and connection position. Remove seals before welding and protect threads and sealing faces from distortion and weld spatter. Clean and leak-test the finished component. Do not weld tanks containing flammable residues; specialist preparation is required.
Common question
Does the AN designation identify a thread?
On this hose barb it is a size reference. A weld-on hose barb is not an AN threaded fitting.
Complete your line assembly
Explore AN line components and accessories. Match sizes, sealing arrangements and hose construction before combining parts.
EXPLORE AN COMPONENTS >
